Crown Covermatt has been especially prepared for use by the trade for the interior decoration of walls and ceilings. Can be applied directly to cement rendering, brick, stone etc., in addition to plaster and soft board surfaces. Covermatt possesses excellent obliterating characteristics and is extremely easy to apply.
Characteristics: High opacity copolymer emulsion paint with lead-free pigmentation. Contains a fungicide to retard mould growth.
Advantages: Excellent hiding power. Economical. The porous nature of the film allows new surfaces to breathe and dry out easily. No primer required on new or previously painted sound masonry surfaces.
Application: Apply by brush, roller or spray equipment.
Thinning: For first coat work and for application to porous or textured surfaces and for spray application, Covermatt can be thinned with clean water but over-thinning should be avoided.
Drying Times: Re-coatable in 4 hours.
The spreading capacity of Crown Covermatt Emulsion varies considerably depending on the texture and porosity of the surface being coated.
The following spreading capacities are approximate in m2/l
Surface type New or Unpainted Previously painted
Smooth- Lime Plaster 11 -14 14 – 15
Cement-Wood Float 9 -11 12 -13
Bag Wash-Concrete Blocks 4 – 6 7 – 8
Tyrolean / Roughcast 3 – 5 3½ – 4½
Equipment Cleaner: Water.
Colour range: Available in a limited range of colours chosen from the BS 4800 shade range and Crown house colours.
Pack Sizes: 4 litres and 20 litres.
New Work – Walls, Ceilings etc: Prepare surfaces (Refer appropriate surface Date Sheet). Apply 3 coats Crown Covermatt.
2 coats may offer complete obliteration depending on the colour in use and the surface being coated but 3 coats are recommended for maximum protection.
Previously (Matt Emulsion) Painted Surfaces in Sound Condition:
Prepare surface. Apply 2 coats Crown Covermatt.
Note: 1 coat may be sufficient when using the same shade over paint work in reasonable condition.
Loosely bound, unsound surfaces (including walls previously painted with distemper, cement paint, lime wash etc): Prepare surface (refer Data Sheet SP 2). Apply 1 coat Crown Penetrating Primer. Apply 2 coats Crown Covermatt.SKU: n/a
Downlighters & Lightings, Gypsum Materials
Generic Ceiling 6W LED Panel Downlight
- Saves up to 80% energy costs
- long life ;25000 hrs
- mercury free
- instant start,non-flickering
- eco-friendly Daylight
- Recessed installation
- Ideal for home,office,hospital,library,mall,halls
- No radio frequency interference
Gyproc jointing filler produce a smooth, continuous, crack-resistant lining surface ready for priming and final decoration. A number of jointing specifications are available to suit the board type, site preference and method of application. When taping and jointing, Gyproc Joint Filler is suitable for application of the taping coat only. It sets to a hard finish and is ideal for use on plasterboard joints under Gyproc Finish Plasters.SKU: n/a
The UltraSTEEL® stud for strong, lightweight installation
Used as the vertical support in wall framing, ‘C’ studs are available in a range of widths, lengths and gauge depending on requirements for strength, height, impact resistance and sound insulation.
Conforming to EN 14195, Gypframe profiles are up to 50% lighter than equivalent timber systems and 70% lighter than blockwork, giving a high strength to weight ratio for guaranteed performance and long life.
The patented UltraSTEEL® process gives the components greater strength, makes fixing easier and improves screw retention and pull-out by up to 20%.
Includes sight lines down the legs of the stud to ease board alignment and increase profile strength
Structural apertures are spaced along the spine of the Gypframe ‘C’ Stud, providing easy routing of services through a partition.
The UltraSTEEL process alters the characteristics of plain steel, providing higher strength capacity at a lighter gauge.
Along with an aesthetic difference UltraSTEEL offers an improvement in yield strength, carrying capacity, screw retention and pull out
Gypframe offers a resilient construction material – it won’t rot, warp, shrink or twist on site and can cope easily with the elementsSKU: n/a
Comfortable and lightweight for smooth rolling
Aluminum shaft gives ultra lightweight and same sturdy as steel
Soft grip handle adds maximum comfort and reduced fatigue
Sturdy 5 wire cage with great locking system and easy to release roller from frame
Threaded handle will fit on any extension poleSKU: n/a