Product Description :
STANDARD CUTOUTS cutouts are made of high grade phenolic moulding power having high mechanical and dielectric strength. The body possesser non-hygroscopic and non-tracking qualities. Terminal contracts are of tinned brass with phosphor bronze back up compression spring capable of providing flawless service even after years of use.
1) Cutout to use with BS88 cylindrical fuse links
2) Rated voltage: 415V AC
3) Current rating: 60A, 80A, 100A
4) Complies with the IEC60269 Standards
Standard: BS1361 Single phase ( SP) or SPN cut out fuse Black bakelite/Grey resin materials Al or copper conductor
+ STANDARD INSULATED CUTOUTS are engineered to provide complete safety & security to
the users and match with the modern aesthetics.
+ They are designed to safe guard distribution, control and protection from shocks &
+ STANDARD CUTOUTS match the latest technology anywhere in the world.
enviroment temperature is -5 degree~+40 degree.
The average temperature in 24 hours shall not exceed +35 degree
The altitude of the installation shall not exceed 2000m.
The relative humidity shall not exceed 50% when the enviromental temperature is +40 degree.The relative humidity maybe higher at lower temperature condition. The maximun month-average relative humidity is 90% in the most humid month,with a minimun month average temperature +25 degree. The factor that dew may occur on the product surface due to temperature change shall be taken intp consideration.
Pollution grade:Grade III.
The product shall be installed and operated at a place without obvious shake, impact and vibration.